O2GO

FLEXIBLE OXYGEN TRANS-FILLS

 

KeepAlive Green Fishing Lights, O2 Fishing Oxygen Regulators and Diffusers
For Bait and Tournament Fish

 

O2GO FISHING SYSTEMS

 

E-Mail

E-Mail

 

PROFESSIONAL OXYGEN INFUSION SYSTEMS

 

 

PRODUCES MILLIONS OF MICRO-FINE OXYGEN BUBBLES

 

Tel. 727-841-0407

P.O. Box 1952, Tarpon Springs, FL 34688

Fax 727-815-8049

 

Home

Regulators

Ceramic Diffusers

Cylinders

Trans-fills

Storage Bags

Accessories

Guide To O2 & Aeration

Infusors

Green Lights

Aerators

Bilge Pumps

Low Pressure Air Diffuser

Places To Purchase

Videos

FLEXIBLE TRANS-FILL WITH SLOW FILLING ORIFICES

Trans-fills with safety features cannot be stressed enough.
Keep
SAFETY first when filling your own cylinders!
KeepAlive Trans-fills are designed with SAFETY for the angler.

KeepAlive OxygenTrans-fills have been designed to provide a slow constant flow of oxygen when filling from the a CGA 540 cylinder supply valve to a portable cylinder equipped with a CGA 540 valve.  Each oxygen trans-fill is equipped with two slow filling orifices. The slow filling orifices located at both ends of the flexible braided hose provides maximum safety during filling. KeepAlive OxygenTrans-fills are specifically  designed for industrial oxygen service only. Use of this trans-fill for gases other than compressed industrial oxygen up to 2500 PSIG, is prohibited, and any user must assume all liabilities and consequences.

NOT FOR MEDICAL USE!

transfillsmall.jpg

KA950 BASIC FLEXIBLE TRANS-FILL


Wrench required for tightening
only at  one end

KA950 BASIC FLEXIBLE TRANS-FILL
$99.95

KA950 Safety Features

1)     If you have access to large welding oxygen cylinders, you can save time and money by simply filling your own fishing cylinders!

2)     Slow filling orifices located at both ends of the flexible braided hose provides maximum safety during filling, and reduces overheating of the filling cylinder!

3)     Hand tightening knurled nut eliminates the requirement of a wrench to tighten at your filling cylinder. Wrench is only required for tightening and hose relief at the supply cylinder.

4)     3 (1 Meter) flexible, braided, high pressure hose. Filling cylinder can be placed on a solid surface while filling.

5)     Cylinder pressure can be checked with your oxygen regulator when completed.

SAFETY FIRST AND ALWAYS!

TRANS-FILL SAFETY INSTRUCTIONS
AND
WARRANTY

 

 

 

KA951 PREMIUM FLEXIBLE TRANS-FILL

SAFETY FIRST AND ALWAYS!

KA951 PREMIUM FLEXIBLE TRANS-FILL
$199.95

KA951 Safety Features

1)     If you have access to large welding oxygen cylinders, you can save time and money by simply filling your own fishing cylinders!

2)     Slow filling orifices located at both ends of the flexible braided hose provides maximum safety during filling, and reduces overheating of the filling cylinder!

3)     Hand tightening knurled nuts eliminate the requirement of a wrench to tighten.

4)     5 flexible, braided, high pressure hose. Filling cylinder can be placed on a solid surface while filling.

5)     Cylinder pressure can be continually monitored durin the filling process.

6)     Hose pressure is easily relieved by opening the installed Relief Valve.

TRANS-FILL SAFETY INSTRUCTIONS
AND
WARRANTY

 

NOT RECOMMENDED

A rigid trans-fill has inherent deficiencies and should not be used!

1.    Filling a cylinder with a rigid trans-fill can be hazardous! Stress due to the weight of a cylinder on the trans-fill and associated connections may separate and result in serious injuries.

2.    Most rigid trans-fills do not have a slow filling orifice, Cylinders can overheat to dangerous levels and cylinders may be damaged.

KeepAlive Fishing Oxygen Infusion Systems
will keep your fish alive and healthy!

Legal Terms of Use