OXYGEN REGULATORS

Best Quality at Affordable Prices For Every Angler!

ALWAYS FOLLOW GOOD SAFETY PRACTICES WHEN USING OXYGEN!

Pure Oxygen and Carbon Dioxide Build-up

When using pure oxygen, remember that the carbon dioxide given off by fish will not dissipate unless some form of aeration occurs within the tank. As carbon dioxide builds up in the water, fish lose the ability to absorb oxygen and dissipate carbon dioxide, and may suffocate. Be sure to read about natural aeration and pure oxygen systems before making your decision on the system that is right for you. In many instances, natural aeration will be sufficient for your application.

NICKEL PLATED BRASS REGULATOR

Our best regulator is made of nickel plated brass  for anglers wanting professional quality regulators with limited life time warranties.

The Best Regulator Warranties Available.

KeepAlive O2GO™
OXYGEN REGULATOR

KA902-O2
Shown with KA915 Cylinder and KA970 Diffuser

6 MONTH WARRANTY AGAINST DEFECTS & WORKMANSHIP,
PLUS
LIMITED-LIFETIME
REPLACEMENT WARRANTY

The KeepAlive O2GO™ is the answer for a quality oxygen regulator with a price for all anglers. Rugged body components of brass, and nickel plated brass to withstand the rigors and harshness of the marine environment.

11 Settings: OFF, 1/32, 1/16, ⅛, 1/4, ½, ¾, 1, 1½, 2, and 4 liters per minute. These settings will allow various oxygen ratios with inexpensive air stones. The KA902-O2 also provides sufficient pressure and oxygen for premium quality diffusers as our KA975, KA970-O2,  and KA9100 diffuser.  

Nickel Plated Brass  with special internal com-ponents. Designed for use in a marine environment.

EXTRA protection to prevent moisture and dust contamination. The extension next to the hose barb keeps contamination from entering the orifice required for all regulators. The red dust cap provides additional protection if left on.

Nut and Nipple style regulator body for use with CGA 540 Inlet Valve Cylinders.

Oxygen tank pressure gauge with gauge protector. Barbed Outlet for direct attachment of oxygen tubing.

KA904-O2

Nut and Nipple style regulator body for use with CGA 540 Inlet Valve Cylinders.

Oxygen tank pressure gauge with gauge protector. Barbed Outlet for direct attachment of oxygen tubing.

Designed for use in a marine environment.
Warning: Not for medical use.

Practice Catch & Release!

6 MONTH WARRANTY AGAINST DEFECTS & WORKMANSHIP,

Care should be taken to protect this product from moisture and physical abuse.

KA904-O2 Regulator  COMING SOON
Weight: 1 lb

This is an excellent compromise for the angler that is looking for a full size, inexpensive, medium priced, reliable regulator. The unique angle of the KA904-O2 allows it to install parallel to the oxygen cylinder, and provides compact storage.

11 Settings: OFF, 1/32, 1/16, ⅛, 1/4, ½, ¾, 1, 1½, 2, and 4 liters per minute. These settings will allow various oxygen ratios with inexpensive air stones. The KA904 also provides sufficient pressure and oxygen for premium quality diffusers as our KA970-O2, KA975 and KA9100 diffuser.

Silver anodized aluminum body with brass com-ponents. Designed for use in a marine environment.

EXTRA protection to prevent moisture and dust contamination. The extension next to the hose barb keeps contamination from entering the orifice required for all regulators. The red dust cap provides additional protection if left on.

WARRANTY
6 MONTH WARRANTY AGAINST DEFECTS & WORKMANSHIP

Care should be taken to protect this product from moisture and physical abuse.

This is an excellent compromise for the angler that is looking for an inexpensive but reliable regulator.

11 Settings: OFF, 1/32, 1/16, ⅛, 1/4, ½, ¾, 1, 1½, 2, and 4 liters per minute. These settings will allow various oxygen ratios with inexpensive air stones. The KA903 also provides sufficient pressure and oxygen for premium quality diffusers as our KA970-O2, KA975 and KA9100 diffuser.

Gold anodized aluminum body with brass components. Designed for use in a marine environment.

EXTRA protection to prevent moisture and dust contamination. The extension next to the hose barb keeps contamination from entering the orifice required for all regulators. The red dust cap provides additional protection if left on.

Nut and Nipple style regulator body for use with CGA 540 Inlet Valve Cylinders.

Oxygen tank pressure gauge with gauge protector. Barbed Outlet for direct attachment of oxygen tubing.